NLO Crystals
Laser Crystals
Electro-optics crystals
Optical Components






















GTR-KTP crystals have gray track resistance sufficiently greater than typical flux grown KTP. This is possible due to advances in the controlled growth of KTP crystals, using proprietary modified fluxes and heat treatment. These GTR-KTP crystals are suitable for high power density applications, where regular flux-grown KTP crystals would suffer from gray track damage.
Standard Specifications
Transmitting Range: 350-4500nm
Dimension Tolerances: (W+/-0.1mm)x(H+/-0.1mm)x(L+0.2/-0.1mm)
Clear Aperture: >90% central area
Angle tolerance: Δθ< ±0.25°, Δφ<±0.25°
Scratch/Dig: 10/5 per MIL-O-13830A
Parallelism: <20"
Perpendicularity: 5'
Flatness: less than λ/8@633nm
Wave-front Distortion: less than λ/8@633nm
Damage Threshold: 600MW/cm2@1064nm (10ns,10Hz)
Coating: Single-band, dual-band and broad-band AR-Coating on GTR-KTP surface are available.
        Low reflectance(R<0.2%@1064nm and R<0.5%@532nm)
Maximum Dimension: 10x10x20mm3
1. High quality crystals with competitive pricing;
2. High gray trace resistance;
3. Large nonlinear optical coefficient;
4. Wide angular bandwidth and small walk-off angle;
5. Broad temperature and spectral bandwidth;
6. High electro-optic coefficient and low dielectric;
7. Non-hydroscopic, chemically and mechanically stable;
8. High thermal conductivity
1. SHG of CW and high average power pulse lasers for green output;
2. E-O modulators, optical switches, directional couplers;
3. Optical waveguides for integrated NLO and E-O devices;
4. Parametric sources (OPG, OPA and OPO) for 350nm-4500nm tunable outputs.
The other specifications for GTR-KTP crystal are available from Sino-crystal Co. Ltd